RemoteGP
Take control of your race footage and capture every moment that matters.
The Apture RemoteGP is a purpose-built GoPro camera controller designed for motorsport. With wireless camera control, intelligent automation, and seamless vehicle integration, the RemoteGP gives you the power to take your camera setup to the next level and reliably capture footage every time you hit the track or stage.
RemoteGP Features
Record the race.
Not the pits.
Focus on what matters. RemoteGP puts GoPro camera control exactly where it belongs – right in the driver’s hands.
Trigger recording instantly, or let the car do it for you. Flexible operation allows connection of an external switch, or button, to start and stop recording, or connect it to the vehicle’s CAN bus.
No wasted footage. No missed moments. Just clean, usable video from the second it matters. After the finish line, keep rolling long enough to capture the reactions and debrief with a customisable delay timer.
Wireless flexibility.
Record every angle.
Forget running cables through your car. The Apture RemoteGP connects wirelessly to your GoPro cameras, giving you the freedom to mount them wherever you like.
Whether it’s inside the cockpit or outside the vehicle, control up to three cameras at once without changing anything about the cameras themselves. No compromises on waterproofing, no complicated installs – just a flexible setup that works the way you want it to.
Ready when you are.
Getting started with the Apture RemoteGP is quick and straightforward. It works right out of the box with GoPro cameras from HERO7 onwards, so you can be up and running in minutes.
And if something happens at an event, you’re not tied to hard-to-find equipment. GoPros are widely available, which means you can easily grab a replacement and keep going without missing out.
Know your GoPro.
Before it matters.
Apture RemoteGP helps you stay one step ahead by showing you exactly what your cameras are doing in real time. Clear status LEDs give you instant feedback, so you’re never left guessing.
You can also enable alerts for common issues like low battery, temperature warnings, disconnected microphones, or incorrect settings. It’ll even pick up on bigger problems like SD card errors before they affect your recording.
With two connection modes, you can choose what suits you best. Always Connect keeps everything monitored at all times, while On Record Request helps save power with smart wake and sleep behaviour.
Mark the moments that matter.
Reviewing footage is much easier when you can jump straight to the important parts.
With Apture RemoteGP’s built-in HiLight tagging, you can instantly mark key moments as they happen. Whether you’re reviewing performance, refining notes, or analysing data, everything is easier to navigate with the important moments marked in your video.
Drop HiLight tags into your GoPro video using the built-in RemoteGP button or an externally wired button. Or step further and integrate with your vehicle’s systems to automate tagging and align video with your data, giving you a clearer more connected view of every run.
Simple setup. Full control.
Advanced capability, without the complexity.
Pre-configured to work straight out of the box, the RemoteGP also enables user customizable configuration through a clean, intuitive desktop tool that makes it easy to tailor the system to your needs. From basic setups to more advanced integrations, everything is designed to be straightforward and efficient.
You stay in control, without getting slowed down by the process.
Built to integrate.
Designed to work seamlessly with your car.
RemoteGP fits naturally into your existing setup, with support for external switches, discreet LED outputs, and full CAN bus integration. Whether you’re keeping things simple or building a fully connected system, it adapts to suit your needs.
The result is a cleaner install, better usability, and a system that feels like part of the car – not an add-on.
Supercharge your GoPro.
Capture More. Worry Less.
Eliminate the worry.
Equipped with Apture SmartStart, RemoteGP monitors your GoPro camera constantly. If your camera stops recording during a stage or race due to a camera error, RemoteGP will continually attempt to restart the camera. Meaning, as soon as the camera is able to, Apture SmartStart will have your camera recording again – with zero effort from you.
RemoteGP ensures your cameras are in the correct mode when it’s time to record, automatically switching to video if needed. It’s a small detail that protects against missed footage – and gives you one less thing to think about before heading out.
Expand your setup.
A system that grows with you.
RemoteGP is supported by a range of thoughtfully designed accessories that extend its capability even further. Whether it’s enhancing recce sessions, simplifying control, or streamlining installation, each addition is built to integrate seamlessly.
Start simple, or build a more advanced system over time – the choice is yours.
APRC Champion | ARC Champion |
NZRC Champion
NZRC Podium Winner | APRC Podium Winner
GoPro Camera Compatability
| MISSION 1 | HERO13 Black | MAX2 | HERO | HERO12 Black | HERO11 Black Mini | HERO11 Black | HERO10 Black | HERO9 Black | HERO8 Black | HERO7 Black | |
|---|---|---|---|---|---|---|---|---|---|---|---|
 |  |  |  |  | .png&w=2048&q=80) |  |  |  |  |  | |
| Always Connect Mode | |||||||||||
| Wake from Sleep | |||||||||||
| Auto Switch to Video | |||||||||||
| HiLight Tags | N/A | ||||||||||
| Low Battery warning | |||||||||||
| Temperature warning | |||||||||||
| Spot Meter not set warning | N/A | N/A | |||||||||
| External Microphone disconnected warning | |||||||||||
| SD Card error alarm |
MISSION 1
| Features | MISSION 1 |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | |
| External Microphone disconnected warning | |
| SD Card error alarm |
HERO13 Black
| Features | HERO13 Black |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | |
| External Microphone disconnected warning | |
| SD Card error alarm |
MAX2
| Features | MAX2 |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | |
| External Microphone disconnected warning | |
| SD Card error alarm |
HERO
| Features | HERO |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | N/A |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | N/A |
| External Microphone disconnected warning | |
| SD Card error alarm |
HERO12 Black
| Features | HERO12 Black |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | |
| External Microphone disconnected warning | |
| SD Card error alarm |
HERO11 Black Mini
| Features | HERO11 Black Mini |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | N/A |
| External Microphone disconnected warning | |
| SD Card error alarm |
HERO11 Black
| Features | HERO11 Black |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | |
| External Microphone disconnected warning | |
| SD Card error alarm |
HERO10 Black
| Features | HERO10 Black |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | |
| External Microphone disconnected warning | |
| SD Card error alarm |
HERO9 Black
| Features | HERO9 Black |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | |
| External Microphone disconnected warning | |
| SD Card error alarm |
HERO8 Black
| Features | HERO8 Black |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | |
| External Microphone disconnected warning | |
| SD Card error alarm |
HERO7 Black
| Features | HERO7 Black |
|---|---|
| Always Connect Mode | |
| Wake from Sleep | |
| Auto Switch to Video | |
| HiLight Tags | |
| Low Battery warning | |
| Temperature warning | |
| Spot Meter not set warning | |
| External Microphone disconnected warning | |
| SD Card error alarm |
Specifications
RemoteGP (Front)
RemoteGP (Side)
RemoteGP (Back)
Electrical & Operating Requirements:
- Operating Voltage 11-15 V nominal
- Operating Current 20-60 mA
- Operating Temperature -10-70 degC
- Storage Temperature -20-80 degC
Connections:
- External switch input (latching or momentary)
- External LED driver (40 mA max)
- CAN 2.0B (configurable baud rate)
- USB-C port
Mechanical:
- 57 x 55 x 16 mm (H x W x D)
- Dust and shock resistant
- Water resistant
- 1x M3 brass insert mounting boss
- Cable length: 300 mm